DS-3E1518P-EI/M(O-STD)

16 Port Gigabit Smart POE Switch
  • 16 x gigabit PoE RJ45 ports, 1 × gigabit RJ45 port, 1 x gigabit fiber optical port
  • Total PoE power budget 130 W
  • Unified cloud management for security systems
  • Network topology at your fingertips
  • Remote troubleshooting
  • Visualized topology management
  • Up to 300 m long-range PoE transmission
  • 6 kV surge protection
Description
  • General
  • ShellMetal material
  • Net Weight2.7 kg (5.9 lb)
  • Gross Weight2.9 kg (6.4 lb)
  • Dimensions (W × H × D)440.0 mm × 220.8 mm × 44.0 mm (17.32” × 8.69” × 1.73”)
  • Operating Temperature0 °C to 45 °C (0 °F to 113 °F)
  • Storage Temperature-40 °C to 85 °C (-40 °F to 185 °F)
  • Operating Humidity5% to 95% (no condensation)
  • Relative Humidity5% to 95% (no condensation)
  • Power Supply100~240 VAC, 50/60 Hz, Max. 2.5 A
  • Installation ModeRack (equipped with mounting ears)
  • Max. Power Consumption150 W
  • Power Consumption in Idle20 W
  • Surge Protection6 KV
  • Network Parameters
  • Ports16 × Gigabit PoE port,1 × Gigabit RJ45 port,1 × Gigabit fiber optical port
  • MAC Address Table8 K
  • Switching Capacity56 Gbps
  • Packet Forwarding Rate41.66 Mpps
  • Internal Cache4.1 Mbits
  • PoE Power Supply
  • PoE StandardIEEE 802.3af,IEEE 802.3at
  • PoE Power Pin8-pin power: 1/2(-), 3/6(+), 4/5(+), 7/8(-)
  • PoE PortPoE: Ports 1 to 16
  • Max. Port Power30 W
  • PoE Power Budget130 W
  • Software Function
  • Long Range
  • Ports 1 to 16: up to 300 m.
  • Long range performance may vary depend on camera model or cable condition.
  • Port Isolation
  • Ports 1 to 16: port isolation mode to improve network security.
  • Ports in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group.
  • PoE WatchdogPorts 1  to 16: auto detect and restart the cameras that do not respond.
  • Link Aggregation
  • Link aggregation is used to aggregate multiple physical ports to form a logical port for load balancing, bandwidth expansion, and port protection.
  • Support static link aggregation.
  • Support 8 aggregation groups.
  • Loop Prevention
  • Loop prevention is used to prevent the switching network from forming loops, which will seriously affect network communication. Disabled by default.
  • Support 802.1D STP.
  • Suppport 802.1w RSTP.
  • VLAN
  • VLAN is used for network scale planning and network health improvement.
  • Support 802.1Q.
  • Configurable VLAN ID from 1-4094.
  • Support Trunk, Access port mode.
  • Support Max. 32 VLAN.
  • HPP
  • Support one-click activation and remote management via Hik-Partner Pro. Functions supported:
  • 1. Display the port rate.
  • 2. Display the port bandwidth utilization rate.
  • 3. Display the PoE power usage.
  • 4. Display topology information.
  • 5. Display the alarm status.
  • 6. Restart ports and devices.
  • 7. Enable port long-rage mode.
  • 8. Remotely upgrade the device.
  • System Maintenance
  • Support device management via web.
  • Support DHCP Client. Enabled by default for dynamic assignment of management IP addresses.
  • Support Super IP, which is a fixed IP address (10.180.190.200) for direct access.
  • Support remote management via Hik-Partner Pro.
  • Support cable detection. Abnormal open circuits and short circuits as well as network cable length can be detected.
  • Support 802.1ab LLDP for peer device discovery.
  • Support port mirroring for fault locating.
  • Approval
  • EMCCE-EMC (EN 55032: 2015+A11: 2020, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011+A1: 2014, EN 55035: 2017+A11: 2020)
  • SafetyCB (AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition), CE-LVD (EN 62368-1: 2014+A11: 2017)
  • Chemistry
  • CE-RoHS (201165EU);
  • WEEE (201219EU);
  • Reach (Regulation (EC) No.19072006)
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “DS-3E1518P-EI/M(O-STD)”

Your email address will not be published. Required fields are marked *

Additional Information