DS-3E1510P-SI

8 Port Gigabit Smart POE Switch
  • 8 × gigabit PoE ports, and 2 × gigabit fiber optical ports.
  • IEEE 802.3at/af standard for PoE ports.
  • Network topology management, alarm push, network health monitor.
  • 6 KV surge protection for PoE ports.
  • AF/AT camera can reach up to 300 m in extend mode.
  • PoE watchdog to auto detect and restart the cameras that do not respond.
  • Various layer 2 management protocols such as STP/RSTP, VLAN, link aggregation, SNMP, QoS and so on.
Description
  • General
  • ShellMetal material
  • Net Weight1.21 kg (2.67 lb)
  • Gross Weight1.3 kg (2.87 lb)
  • Dimensions (W × H × D)217.60 mm × 27.80 mm × 108.55 mm (8.57” × 1.09” × 4.27”)
  • Operating Temperature0 °C to 40 °C (32 °F to 104 °F)
  • Storage Temperature-40 °C to 85 °C (-40 °F to 185 °F)
  • Operating Humidity5% to 95% (no condensation)
  • Relative Humidity5% to 95% (no condensation)
  • Power Supply48 VDC, 2.5 A
  • Installation ModeDesk-Mounted,Wall-Mounted
  • Max. Power Consumption120 W
  • Power Consumption in Idle7 W
  • Surge Protection6 KV
  • Network Parameters
  • Ports8 × Gigabit PoE port,2 × Gigabit fiber optical port
  • MAC Address Table8 K
  • Switching Capacity20 Gbps
  • Packet Forwarding Rate14.88 Mpps
  • Internal Cache4.1 Mbits
  • PoE Power Supply
  • PoE StandardIEEE 802.3af,IEEE 802.3at
  • PoE Power PinEnd-span: 1/2(+), 3/6(-);
  • PoE PortPoE: Ports 1 to 8
  • Max. Port Power30 W
  • PoE Power Budget110 W
  • Software Function
  • Long Range
  • Ports 1 to 8: up to 300 m.
  • Long range performance may vary depend on camera model or cable condition.
  • Port Isolation
  • Ports 1 to 8: port isolation mode to improve network security.
  • Ports in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group.
  • PoE WatchdogPorts 1 to 8: auto detect and restart the cameras that do not respond.
  • Link Aggregation
  • Link aggregation is used to aggregate multiple physical ports to form a logical port for load balancing, bandwidth expansion, and port protection.
  • Support static link aggregation.
  • Support 8 aggregation groups.
  • Loop Prevention
  • Loop prevention is used to prevent the switching network from forming loops, which will seriously affect network communication. Disabled by default.
  • Support 802.1D STP.
  • QoS
  • QoS is used to allocate bandwidth to different services so as to provide end-to-end service quality assurance.
  • Support port-based priority configuration.
  • Support SP, WRR priority schedule mode.
  • VLAN
  • VLAN is used for network scale planning and network health improvement.
  • Support 802.1Q.
  • Configurable VLAN ID from 1-4094.
  • Support Trunk, Access port mode.
  • Support Max. 4094 VLAN.
  • HPP
  • Support one-click activation and remote management via Hik-Partner Pro. Functions supported:
  • 1. Display the port rate.
  • 2. Display the port bandwidth utilization rate.
  • 3. Display the PoE power usage.
  • 4. Display topology information.
  • 5. Display the alarm status.
  • 6. Restart ports and devices.
  • 7. Enable port long-rage mode.
  • 8. Remotely upgrade the device.
  • System MaintenanceRemote upgrade, default parameters recovery, logs viewing, basic network parameters configuration, import and export configuration, time sync
  • Port Rate-Limiting Port rate-limiting is used for port bandwidth adjustment to prevent network congestion.
  • Storm Control
  • Storm control is used to prevent switch ports from being blocked by broadcast or multicast storms in the LAN, which may affect network communication.
  • Support port rate limiting based on broadcast, multicast, and unknown unicast packets.
  • Approval
  • EMC
  • FCC (47 CFR Part 15, Subpart B);
  • CE-EMC (EN 55032: 2015, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011 +A1: 2014, EN 55035: 2017);
  • IC (ICES-003: Issue 6);
  • RCM (ASNZS CISPR 32: 2015)
  • Safety
  • UL (UL 60950-1);
  • CB (IEC 60950-1:2005, AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition);
  • CE-LVD (EN 60950-1: 2006 + A11: 2009 +A1: 2010+A12: 2011+A2: 2013, EN 62368-1: 2014+A11: 2017)
  • Chemistry
  • CE-RoHS (201165EU);
  • WEEE (201219EU);
  • Reach (Regulation (EC) No.19072006)
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “DS-3E1510P-SI”

Your email address will not be published. Required fields are marked *

Additional Information